Eagle Harbor, Bainbridge Island, WA
Open Bench: Tue–Sat, 09:00–17:00 PT
Yard Designs & Oar Loft

Fleet Specifications & Oar Sizing

Filter our four standard Pacific Northwest builds or use our bench geometry calculator below to determine proper oar length and leverage ratio for your hull beam.

Showing 4 of 4 builds
Pulling Skiff
Hull No. EH-14

Eagle Harbor 14

Our primary open-sound rowing boat with nine overlapping Western Red Cedar strakes per side, dual rowing stations, and optional bronze centerboard trunk for a lug rig.

  • Length Overall14 ft 2 in
  • Beam50 in
  • Bare Weight118 lbs
  • Matched Oars8 ft Sitka
Harbor Tender
Hull No. AP-12

Agate Pass 12

Compact, buoyant lapstrake dinghy designed to tow cleanly behind cruising sailboats and row straight with three passengers and weekend stores aboard.

  • Length Overall11 ft 10 in
  • Beam48 in
  • Bare Weight92 lbs
  • Matched Oars7.5 ft Sitka
Coastal Dory
Hull No. PM-16

Port Madison 16

Flared-side working dory with Alaskan Yellow Cedar flat bottom and high bow sheer for exposed Puget Sound crossings, beach camping, and two-pair tandem rowing.

  • Length Overall16 ft 0 in
  • Beam54 in
  • Bare Weight156 lbs
  • Matched Oars8.5 ft Sitka
Oar Loft
Pattern SS-04

Puget Sound Sitka Oars

Hand-planed single-piece or scarfed Sitka spruce shafts with 1.25-inch ergonomic grips, stitched vegetable-tanned leather sleeves, and hand-riveted copper blade tips.

  • Standard Lengths6.5 – 9.5 ft
  • Blade Width4.0 – 4.5 in
  • Shaft Diameter1.625 in
  • FinishRaw Oil / Spar
Bench Geometry Tool

Oar Length & Leverage Estimator

Enter the span between oarlocks (roughly the beam at the rowing thwart) to estimate balanced Sitka spruce oar length using traditional 7:18 inboard-to-outboard geometry.

Recommended Oar Length
7.5 ft (90 in)
Rounded to standard 6-inch loft increments
Inboard / Outboard Ratio
27 in / 63 in (1 : 2.33)
Assumes 2-inch handle overlap at mid-stroke
Suggested Blade Profile
4.25 in flat Sitka spruce blade
Copper-tipped edge standard on all builds
Finished Sitka spruce oars with leather collars and copper blade tips on a timber workbench
Custom Fitting

Leather collars placed to your exact oarlock span.

Before stitching the harness leather collar and button onto any custom pair of oars, we record your boat's exact oarlock pin spacing and thwart height so the balance point sits squarely on the horn when resting.

Schedule a loft measurement →