Eagle Harbor, Bainbridge Island, WA
Open Bench: Tue–Sat, 09:00–17:00 PT
Bainbridge Island • Pacific Northwest

Cedar rowing skiffs built for Puget Sound water.

Bainbridge Boatworks builds traditional copper-riveted lapstrake skiffs, sailing tenders, and solid Sitka spruce oars one hull at a time along the north shore of Eagle Harbor.

Hull Planking
Red Cedar
Annual Builds
6–8 Hulls
Fastenings
Copper Roves
Handcrafted Western Red Cedar lapstrake rowing skiff resting on timber sawhorses inside a sunlit Bainbridge Island boatbuilding loft overlooking Puget Sound
Current Yard Output

Small craft and matched Sitka oars.

Each hull is built to order with custom thwart heights, oarlock spacing, and painted or oiled cedar interior trim.

View full specifications →
White-painted lapstrake wooden rowing skiff with varnished cedar gunwales moored beside a gray timber dock in calm Puget Sound water
Pulling Skiffs & Tenders

Eagle Harbor 14 & Agate Pass 12

Easily driven lapstrake hulls drawn for tidal passages and protected coves. Fine entry forward reduces slapping in wind-against-tide chop while keeping dry freeboard for two adults.

LOA: 12–16 ft Beam: 48–54 in Draft: 5 in
Inspect hull models →
Four hand-carved Sitka spruce rowing oars with stitched leather collars and copper blade tips on a wooden workbench beside a brass spokeshave
The Oar Loft

Hand-Shaped Sitka Spruce Oars

Carved from straight-grained Pacific spruce in 6-inch length increments from 6.5 to 9.5 feet. Balanced at the loom so the blades clear choppy water without tiring the wrists.

Lengths: 6.5–9.5 ft Collar: Waxed Harness Leather Tips: Riveted Copper
Calculate your oar length →
Close-up view inside a wooden lapstrake dinghy showing Western Red Cedar planking fastened with copper rivets over steam-bent white oak ribs
Traditional Clinker Method

Copper rivets, white oak frames, and zero fiberglass cloth.

Instead of sealing softwood inside heavy resin skins that trap moisture, our boats breathe and flex the way working Northwest skiffs have for a century. Every strake lap is hand-planed to a feather tight fit and cinched with #10 copper nails peened over dished roves.

  • Planking Thickness3/8 in Western Red Cedar
  • Backbone & StemAlaskan Yellow Cedar
  • Fastening Spacing2.5 in along every lap
  • Interior FinishRaw tung oil & pine rosin
Read timber & care notes →
Weathered cedar-shingle boatbuilding shop with dark navy barn doors open along a gravel shoreline in Eagle Harbor, Bainbridge Island
Eagle Harbor Loft

Walk the shop floor on Saturday mornings.

The yard sits a ten-minute walk west of the Bainbridge ferry terminal along Harborview Way. Stop by on Saturdays to see hulls in planking, test oar grip diameters at the bench, or bring an older dinghy by the gravel launch ramp for an honest repair estimate.